Camas has one of Clark County's highest concentrations of owner-occupied, well-maintained homes. Homeowners here take pride in their properties — and kitchen remodels typically target either resale value or matching the finish quality of neighboring homes. That means material expectations skew higher than the Clark County average.
Whether you're refreshing before a sale, finally replacing cabinets that have been on the list for a decade, or doing a full open-plan conversion, this guide gives you real 2026 numbers to work with. We've broken it down by scope tier, component, and what's unique about remodeling in Camas specifically.
The short version: cosmetic refresh runs $1,500–$4,000, a typical mid-range update is $15,000–$35,000, and a full custom project is $45,000–$80,000+. Camas projects tend to land at the upper half of any range — because Camas homeowners choose better materials.
Kitchen Remodel Cost by Scope
The biggest cost driver is how much you're replacing. These four tiers cover the full range Camas homeowners work within in 2026.
| Scope | Cost Range | Timeline |
|---|---|---|
| Cosmetic Refresh Paint, new hardware, backsplash tile, faucet swap, updated light fixtures. No cabinet or countertop replacement. | $1,500 – $4,000 | 1–3 days |
| Mid-Range Update New semi-custom cabinets, quartz or granite countertops, updated sink and faucet, new appliances, backsplash, and lighting. Layout unchanged. | $15,000 – $35,000 | 2–4 weeks |
| Full Gut Remodel Complete demo and rebuild. All new cabinets, countertops, flooring, appliances, lighting. Layout unchanged. | $25,000 – $55,000 | 4–8 weeks |
| Custom / Layout Change Custom cabinetry, premium countertops, island addition, relocated plumbing or gas, high-end appliance package, new flooring throughout. | $45,000 – $80,000+ | 6–12 weeks |
Based on 2026 Clark County contractor rates. Prices include licensed labor and standard materials. Site conditions and material upgrades affect final cost.
Kitchen Component Costs: Line by Line
If you're swapping specific components or building a custom scope, here's what each piece of a Camas kitchen remodel costs in 2026.
| Component | Low End | High End |
|---|---|---|
| Cabinet refacing (doors + hardware) | $3,000 | $8,000 |
| Semi-custom cabinet replacement | $5,000 | $15,000 |
| Custom cabinetry | $15,000 | $40,000 |
| Laminate countertop (installed) | $1,200 | $2,500 |
| Quartz or granite countertop (installed) | $3,500 | $7,000 |
| Tile backsplash (installed) | $400 | $1,800 |
| Sink + faucet (installed) | $300 | $900 |
| Recessed lighting (per can, new) | $300 | $800 |
| LVP flooring (per sq ft installed) | $4 | $8 |
| Tile flooring (per sq ft installed) | $10 | $22 |
| Appliance package (mid-range) | $3,000 | $8,000 |
| Clark County building permit | $150 | $800 |
Labor included where noted. Flooring marked per sq ft. Appliance pricing includes standard installation.
Why Camas Kitchen Remodels Tend to Cost More
Higher Finish Expectations
Camas homeowners typically choose quartz over laminate, full-overlay cabinets over stock box, and tile over LVP. These upgrades are the right call for the market — but each one bumps the total. A mid-range Camas kitchen often looks like a high-end Vancouver kitchen in terms of materials.
Open-Plan Layouts Require More Cabinetry
Prune Hill and Grass Valley homes commonly feature open-plan kitchen/living spaces with long runs of cabinetry, islands, and pantry builds. More linear footage of cabinets means higher material and labor costs — even at the same price-per-linear-foot as a smaller kitchen.
2026 Tariff Impacts
Appliance prices are up 5–8% in 2026 due to tariffs on electronics and components. Tile and stone products — backsplash, flooring, countertops — are up 10–15%. These increases hit harder in Camas because the baseline material choices are already at the higher end.
Permit Requirements
Any project involving plumbing, electrical, or structural work requires a Clark County permit — $150–$800 depending on scope. Camas kitchens doing full gut remodels or layout changes almost always trigger permits. Norbilt handles all permit filings as part of your project.
6 Factors That Affect Your Camas Kitchen Remodel Cost
Layout Changes
Moving a sink, range, or refrigerator location adds $2,000–$8,000 in rough plumbing and electrical work. Camas open-plan kitchens are popular — but any wall removal or structural change requires permits and engineering review.
Cabinet Grade
Stock cabinets run $75–$150/linear ft installed. Semi-custom run $150–$400. Full custom can hit $500–$1,000+/linear ft. Camas homeowners frequently choose semi-custom or full-overlay cabinets over stock — expect to spend closer to the mid or high end.
Countertop Material
Laminate is $1,200–$2,500 installed. Quartz and granite run $3,500–$7,000. Quartzite and natural stone can exceed $10,000. In Camas, quartz is the standard — laminate is rare in mid-range and above remodels here.
Permit Requirements
Cosmetic work (paint, hardware, backsplash, faucet swaps) needs no permit. Any electrical, plumbing, or structural work requires a Clark County permit — $150–$800 depending on scope. Norbilt pulls all required permits.
2026 Material Tariffs
Appliance prices are up 5–8% in 2026 due to import tariffs on electronics and components. Tile and stone products are up 10–15%. Budget accordingly — or lock in your materials early when we finalize your scope.
Home Age
Camas has many well-maintained 1990s–2000s homes. These kitchens often have outdated electrical (older GFCIs, limited outlets) or galvanized plumbing that needs upgrading during a remodel. Budget 10–15% contingency on any home built before 2000.
Mid-Range Kitchen Remodel Cost by City
Labor rates are consistent across Clark County. Price variation between cities reflects home age, kitchen size, and typical finish choices in each market.
| City | Mid-Range Cost (2026) |
|---|---|
| Vancouver, WA | $15,000 – $35,000 |
| Camas, WA | $18,000 – $40,000 |
| Ridgefield, WA | $16,000 – $38,000 |
| Battle Ground, WA | $14,000 – $32,000 |
| Washougal, WA | $15,000 – $35,000 |
How to Get More Kitchen for Your Budget in Camas
Keep the layout. Don't move the sink, dishwasher, or range location. This alone saves $2,000–$8,000 in plumbing and electrical rough-in costs.
Reface instead of replace if your cabinet boxes are solid. New doors and hardware at $3,000–$8,000 vs. full replacement at $15,000+.
Choose quartz over natural stone. Quartz performs as well, requires less maintenance, and costs about the same as natural granite — often less.
Phase the work. Do cabinets and countertops now; add the island or appliance upgrade later. A licensed contractor can plan the rough-in for future phases without rework.
Lock in materials early. 2026 tariffs on tile and appliances are ongoing — ordering materials at time of contract sign protects you from mid-project price increases.
Frequently Asked Questions
01How much does a kitchen remodel cost in Camas WA?
+
How much does a kitchen remodel cost in Camas WA?
02Do kitchen remodels require a permit in Camas WA?
+
Do kitchen remodels require a permit in Camas WA?
03How long does a kitchen remodel take in Camas?
+
How long does a kitchen remodel take in Camas?
04What adds the most value in a Camas kitchen remodel?
+
What adds the most value in a Camas kitchen remodel?
05Can you do kitchen updates without a full remodel in Camas?
+
Can you do kitchen updates without a full remodel in Camas?
06Is your kitchen remodel work covered by a warranty in Camas WA?
+
Is your kitchen remodel work covered by a warranty in Camas WA?
Ready to Get Started?
Norbilt handles kitchen remodels throughout Camas and Clark County — free estimate, 1-year warranty.
Related Resources